Last updated:

Case Study · Dryer Repair · Woodway, WA

Speed Queen dryer not heating in Woodway: replacing a broken heater element.

This Speed Queen electric dryer in Woodway stopped heating overnight. The drum still turned, but the air stayed cold. The heater element had broken: the meter read an open circuit and the break in the coil was easy to see. We replaced the heater element assembly and ran a full cycle to confirm it was heating again. Real photos from the job below.

  • Location: Woodway, WA, next to Edmonds
  • Speed Queen ADE4BRGS176TW01 electric dryer
  • Problem: dryer running but not heating
  • Cause: heater element coil broken (open circuit)
  • Repair: heater element assembly replaced, full cycle tested
  • Repaired by Max, owner-technician, Authorized Speed Queen Service Provider
5.0 Google Rating Authorized Speed Queen Service 90-Day Warranty Owner-Operated

What happened

From a cold dryer to a glowing new element

The problem

The homeowner’s Speed Queen ADE4BRGS176TW01 electric dryer quit heating overnight. It still started, and the drum still turned, but nothing came out warm.

The diagnosis

With the lower front panel off, we pulled the heater element assembly out from under the drum and checked it with a meter. It read OL, an open circuit, so no current could flow through it. Looking along the coil, the break was right there: one section of wire had snapped apart.

The fix

We installed a new heater element assembly, put the dryer back together and ran a full cycle. The new element glowed red through the heater box and the dryer heated normally. The repair carries our 90-day warranty.

Real photos

This job, start to finish

White Speed Queen Commercial Heavy Duty electric dryer in a Woodway laundry room

The Speed Queen dryer in its Woodway laundry room

Speed Queen dryer control panel with the fabric selector and signal knobs and the Commercial Heavy Duty label

Fabric selector set to Regular, but the air stayed cold

Speed Queen dryer heater element assembly removed and leaning against the dryer, with a Fluke multimeter reading OL

Heater element out of the dryer. The meter reads OL: an open circuit

Technician's fingers holding a section of the dryer heater element coil where the wire has broken apart

The break in the coil that stopped the heat

Two Speed Queen dryer heater element assemblies on the floor in front of the open dryer, one clean and one with lint caught on it

New heater assembly (left) beside the old one (right), with lint caught on it

Inside the Speed Queen dryer base, the new heater element glowing orange through the slots of the heater box

Test run: the new element glowing through the heater box

Close-up of the dryer heater box with the new element glowing behind the slots and the wiring to the thermostat

Close-up of the heater box during the test cycle

Alliance Laundry Systems rating label showing model ADE4BRGS176TW01 and product code DC5000WE

Rating label: model ADE4BRGS176TW01, product code DC5000WE

Why choose us

Why Woodway and Edmonds homeowners call Ace Appliance Service

Authorized Speed Queen service

Ace Appliance Service is an Authorized Speed Queen Service Provider. See our Speed Queen repair page for washers, dryers and stacked laundry centers.

One technician, start to finish

The same owner-technician tests the dryer, explains what failed, and does the repair. No call center and no subcontractors.

90-day warranty

WA Contractor #ACEAPAS774K6. This repair is backed by our 90-day warranty. See our dryer repair page for more.

Questions

Speed Queen dryer repair in Woodway: FAQ

Do you repair dryers in Woodway?

Yes — this case study is a Speed Queen electric dryer in a Woodway home. We also serve nearby Edmonds, Shoreline, Lynnwood and Mountlake Terrace.

Are you an authorized Speed Queen service provider?

Yes. Ace Appliance Service is an Authorized Speed Queen Service Provider for residential washers, dryers and stacked laundry centers.

How much does it cost to replace a Speed Queen dryer heating element?

It depends on the model and the part. We test the dryer first, then give a clear price before any repair begins.

Are you licensed and insured?

Yes, Ace Appliance Service LLC is licensed and insured to work in Washington State. WA contractor license #ACEAPAS774K6.

Common Speed Queen dryer problems

Why is my Speed Queen dryer running but not heating?

On an electric dryer, a broken heating element is one of the most common causes. A blown thermal fuse or a failed thermostat can do the same thing, and a blocked vent often trips them. On this Speed Queen, the element itself had broken, so it was replaced.

How do you test a dryer heating element?

With the power off, we check the element with a multimeter. A good element shows a resistance reading; a broken one reads OL, an open circuit. On this dryer the meter read OL and the break in the coil was visible.

Ready when you are

Dryer running but not heating? Let’s take a look.

Call now for the fastest response, or send us a few details and we'll call you back within one business hour.

(425) 533-0823 Call Now · Same-Day Service

Mon–Fri, 8am–6pm

Submitting this form sends a request — it doesn't reserve a specific appointment time. We'll call or text to confirm scheduling.

Call Now Request Service