Last updated:

Guide · Sub-Zero

How much does Sub-Zero repair cost? Real prices from 17 of our repairs

Most cost guides quote national averages. These are the actual invoice totals from 17 Sub-Zero repairs we completed in the Seattle area between January 2025 and November 2026, with the model, what was wrong, and what it cost.

5-Star Google Reviews Licensed & Insured Owner-Operated Price Approved Before Work Starts

The short answer

Across 17 Sub-Zero repairs we completed from January 2025 to November 2026, the invoice totals before sales tax fell into three groups. Drain and maintenance jobs ran $280–$383. Repairs centered on one system, such as both door gaskets or the defrost sensors, ran $690–$937. Multi-part repairs, an ice maker and water valve, a main control board, or a sealed-system repair ran $1,175–$1,751. Typical price ranges for the most common repairs are in the table below. These invoice totals are what past customers paid, not a price list or a quote: part prices change and no two units need exactly the same work. Your price is the one we give you after diagnosing your unit, and you approve it before any work starts.

Every repair is different. These 17 jobs are a random sample of our Sub-Zero repairs from the past two years, not a complete record or an average. They are here to give you a rough idea of what to expect. The figures on this page are for reference only. They are not a price list, a price guide, or a quote. On some of the past jobs below, a part was covered by the manufacturer’s warranty, so that invoice doesn’t include the full part cost; on others, extra problems found during the same visit were fixed too. Your price depends on your model, what the diagnosis finds, and current part prices, and you approve it before any work starts.

Typical price ranges for common Sub-Zero repairs

Ranges for the Sub-Zero repairs we do most often in 2026, including genuine parts and labor, before sales tax. They're brackets, not quotes: the same repair can land at the low or high end depending on the model, how many parts are involved, and what else the diagnosis turns up. The exact price comes after we look at your unit.

RepairTypical range
Condenser and drain cleaning$280–$410
Door gasket replacement, one or both doors$430–$940
Defrost repair: heater, limit, timer, or sensor$440–$800
Evaporator or condenser fan motor$430–$560
Ice maker or water fill valve$480–$1,200
Main control boardfrom $715
Sealed system: leak, compressor, evaporator$1,380–$2,600

Examples from our records: 17 Sub-Zero repairs by type

Every row below is a completed repair from our records, January 2025 to November 2026. Totals are the full invoice before sales tax, including parts, labor, and shipping. City names are where the job was; nothing else about the customer is shown. These are records of past jobs, not a price list: on some of them a part was covered by the manufacturer’s warranty, and the same symptom can need a different repair on your unit.

Drain cleaning and maintenance: $280–$383

Water on the floor or ice building up inside the refrigerator is one of the most common Sub-Zero calls we get, and it's often a clogged defrost drain rather than a failed part. A dust-matted condenser, which makes the unit run hot and constantly, is usually cleaned during the same visit. Our Sub-Zero maintenance guide covers what you can check yourself.

What we didBefore tax
Condenser coil and drain system cleaningBI-48SD/S/TH · Mill Creek$280.00
Clogged defrost drain cleared and flushedBI-48SID/S/TH · Seattle$280.00
Drain system cleaning550 · Kirkland$290.00
Drain system cleaning650/F · Woodinville$320.60
Drain system repair and maintenanceBI-42UFDID/S/PH · Seattle$333.60
Maintenance, water and air filters, condenser cleaningBuilt-in refrigerator · Mukilteo$354.91
Maintenance, water and air filters, condenser cleaningBI-48SD/S/PH · Mukilteo$382.95

Gaskets, defrost sensors, or one system: $690–$937

Torn door gaskets and failed defrost sensors are the typical mid-range repairs. On a two-door unit, replacing both gaskets is usually most of the cost.

What we didBefore tax
Both door gaskets replaced, drain flushed690/S · Bellevue$690.00
Defrost thermistor and defrost terminator replaced690/F · Redmond$790.00
Freezer gasket, evaporator thermistor, door switch650/F · Mercer Island$842.74
Cold control and door gasket replaced, drain and condenser cleaned590 · Everett$869.62
Both door gaskets replaced532 · Kenmore$937.45

Multi-part, ice maker, control board, or sealed system: $1,175–$1,751

The most expensive visits usually fixed several unrelated problems at once on an older unit, or involved a major component: a main control board, the ice maker and water valve, or the sealed system. A refrigerant leak means replacing sealed-system parts, evacuating, and recharging, which requires EPA Section 608 certification. See our Seattle case study for what that job involves.

What we didBefore tax
Ice maker assembly and water inlet valve replaced after a leak561 · Kirkland$1,174.89
Both gaskets, drain heater kit, door switch, light socket, condenser cleaning501R · Redmond$1,226.30
Sealed system: compressor, evaporator, heat exchanger, filter-drierBuilt-in refrigerator · Brier$1,380.00
Condenser cooling assembly, door gasket, thermostat knob, drain repair550 · Clyde Hill$1,442.98
Main power control board, door gasket, water and air filtersBI-48SD/O · Snohomish$1,751.23

Is it worth repairing?

Usually, yes. Built-in Sub-Zero refrigeration typically lasts 20 to 35 years or more, and the most expensive repair in this set was $1,751.23. Several of the units above, like the 532 in Kenmore (built in 1993) and the 590 in Everett (installed in 1996), were decades old and still worth fixing. See our repair or replace guide for how we think it through.

How we price a Sub-Zero repair

The figures on this page are past invoices shown for reference, not a quote or an offer. A technician diagnoses your unit in your home first. You get the price for the repair before any work begins. The service call fee varies by area; in 2026 it is generally $120–$148, and it applies toward the repair if you go ahead. We use genuine Sub-Zero parts. If the unit is still under Sub-Zero's factory warranty, contact Sub-Zero first; Ace Appliance Service is an independent repair company, not a factory-certified servicer. For the full picture of what we fix, see our Sub-Zero repair page, or the city pages for Seattle, Bellevue, and Kirkland.

Questions

Sub-Zero repair cost: FAQ

How much does it cost to repair a Sub-Zero refrigerator?

On 17 Sub-Zero repairs we completed between January 2025 and November 2026, totals before sales tax ranged from $280 for a drain cleaning to $1,751.23 for a main control board, door gasket, and filters. Most single-system repairs, like both door gaskets or the defrost sensors, came in at $690–$937. Those are past jobs, not a quote: every situation is different, and on some of those jobs a part was covered by the manufacturer’s warranty. Your price depends on what your unit needs, and we give it to you after diagnosis.

Will I know the price before you start?

Yes. We diagnose the unit first and give you the price for the repair. No repair work starts until you approve it. The service call fee varies by area, generally $120–$148 in 2026, and it applies toward the repair if you go ahead.

Are you a Sub-Zero factory-certified servicer?

No. Ace Appliance Service is an independent repair company that uses genuine Sub-Zero parts. If your Sub-Zero is still under its factory warranty, contact Sub-Zero first so that coverage isn't affected.

Costs for common Sub-Zero problems

How much does it cost to fix a Sub-Zero that's leaking water?

Often less than people expect. The most common cause is a clogged defrost drain, and clearing it ran $280–$335 on our recent jobs. If a failed water valve has damaged the ice maker, as on a Sub-Zero 561 in Kirkland, replacing both came to $1,174.89.

How much does a Sub-Zero door gasket replacement cost?

Replacing both door gaskets came to $690 on a 690/S in Bellevue (including a drain flush) and $937.45 on a 532 in Kenmore.

How much does a Sub-Zero sealed-system repair cost?

It depends on which parts have failed. Replacing the compressor, evaporator, heat exchanger, and filter-drier on a built-in Sub-Zero in Brier came to $1,380 before tax. A sealed-system repair always starts with a diagnosis to confirm a leak or failed compressor before any parts are ordered.

Want a real number for your Sub-Zero?

We’ll diagnose it and give you the price before we start.

Call now, or send us a few details and we'll call you back within one business hour.

(425) 533-0823 Call Now · Mon–Fri, 8am–6pm

Submitting this form sends a request — it doesn't reserve a specific appointment time. We'll call or text to confirm scheduling.

Call Now Text a Photo