Last updated:

Case Study · Liebherr MF 1851 · Seattle, WA

Liebherr ice maker error in Seattle: the ice maker module had failed.

This panel-ready Liebherr MF 1851 freezer, built into the cabinetry of a Seattle kitchen, was showing an ice maker error. The fault was in the ice maker module itself, the self-contained unit at the top of the freezer that fills, freezes and ejects the ice. Max replaced the complete module on November 13, 2026, and the error cleared.

  • Liebherr MF 1851 NoFrost freezer, 7.8 cu ft, built in
  • Symptom: ice maker error
  • Repair: complete ice maker module replaced, error cleared
  • Authorized Liebherr Service Provider, 1-year warranty
Panel-ready Liebherr MF 1851 freezer built into wood kitchen cabinetry in Seattle, door open, showing shelves, freezer drawers and the Liebherr display
5.0 Google Rating Licensed & Insured 1-Year Warranty Authorized Liebherr Service

Before touching anything

What the rating plate says about this freezer

Every Liebherr has a rating plate inside the cabinet. On this one it sits on the left wall, right beside the ice maker. It’s the first thing worth photographing when you call for service. Here is what it shows.

Model MF 1851, Index 23A/237, service number 0912614-01. The model alone isn’t the whole story on a Liebherr: the index and service number identify the exact version of the unit, so all three go into the service record.

“Freezer NoFrost side-by-side.” An all-freezer column, NoFrost, meaning it defrosts itself automatically. The ice maker lives in its own compartment at the top, above the first freezer drawer.

7.8 cu ft, R600a refrigerant (38 g / 1.34 oz), made in Austria. The cooling side was not the issue here. The ice maker is a separate module that plugs into the freezer, so this repair didn’t involve the sealed system at all.

Liebherr rating plate showing model MF 1851 Index 23A/237, service number 0912614-01, Freezer NoFrost side-by-side, 7.8 cubic feet, R600a 38 g, made in Austria

The visit, in order

From an ice maker error to a new module

1

Confirm the fault

The freezer was showing an ice maker error. We checked the ice maker and traced the error to the ice maker module itself, not to the rest of the freezer.

2

Take the old module out

With the ice bin drawer out of the way, the ice maker module comes out through the front of the freezer and unplugs at a single connector. The freezer stayed in its cabinetry for the whole repair.

3

Fit the new module

The new Liebherr ice maker module went into the same mounts and plugged into the same connector, replacing the old one as one complete assembly. With the new module in, the ice maker error cleared. The repair is covered by our 1-year parts and labor warranty on Liebherr repairs.

Real photos

From this Seattle kitchen

Top compartment of a Liebherr MF 1851 freezer with the ice maker module mounted above the ice bin drawer and the rating plate on the left wall

The ice maker, top compartment of the freezer

Liebherr ice maker module held in hand in front of the open MF 1851 freezer

Ice maker module out of the freezer

Top of a Liebherr ice maker module showing its wiring connector, on the floor during an MF 1851 repair

The module’s single wiring connector

Two Liebherr ice maker modules side by side on a wood floor during an MF 1851 repair in Seattle

New module (left) next to the old one (right)

Questions

Liebherr ice maker repair in Seattle: FAQ

Do you repair Liebherr freezers and ice makers in Seattle?

Yes. This job was a Liebherr MF 1851 in Seattle. Ace Appliance Service is an Authorized Liebherr Service Provider covering Seattle, the Eastside, and the North Sound. See Liebherr refrigerator repair in Seattle.

What warranty comes with a Liebherr repair?

Liebherr repairs come with our 1-year parts and labor warranty. Ace Appliance Service LLC is licensed and insured in Washington State, WA contractor #ACEAPAS774K6.

How much does it cost to replace a Liebherr ice maker?

It depends on the model and the part. We diagnose first and give a clear price before any repair begins. The service call is $148 + tax in our regular service area, and if you go ahead with the repair it’s applied toward the repair cost.

Common Liebherr ice maker problems

Why is my Liebherr ice maker showing an error?

An ice maker error means the freezer’s electronics have flagged a problem with the ice maker. On this MF 1851 the fault was in the ice maker module itself, and replacing the complete module was the fix. We test before replacing anything, so the part that gets replaced is the part that actually failed.

Can a Liebherr ice maker be repaired, or does it have to be replaced?

On the Liebherr ice maker jobs we’ve done, the fix was replacing the ice maker as a complete assembly: on this MF 1851 in Seattle, on an HC 2060 in Shoreline, and on a CS 2060 in Lake Forest Park.

My Liebherr freezer isn’t cooling. Is that the ice maker?

Usually not; that’s a separate problem. On a Liebherr CS 2060 in Seattle the freezer was frosting over from a defrost sensor fault (see that case study), and on a CBS 2062 in Seattle the freezer’s sealed system needed a new compressor (see that case study). See also our guide to a Liebherr not cooling or alarm beeping.

Ready when you are

Liebherr ice maker showing an error or not making ice?

Call now for the fastest response, or send us a few details and we'll call you back within one business hour.

(425) 533-0823 Call Now · Same-Day Service

Mon–Fri, 8am–6pm

Submitting this form sends a request — it doesn't reserve a specific appointment time. We'll call or text to confirm scheduling.

Call Now Text a Photo